ISCC EU · UCO scope planning
Does UCO filtration or heating change your ISCC EU certification scope?
Preparing UCO for biodiesel, renewable diesel or HEFA? Check filtration, sedimentation, heating and energy evidence before agreeing your ISCC EU scope.
When seeking ISCC EU certification for a used cooking oil (UCO) collection or preparation site, describe each operation before choosing the scope. Mechanical filtration or sedimentation can fall within a collecting point or storage operation under specified conditions. Heating or other treatment needs assessment against what actually happens to the material and the energy used. Send a process flow and supporting records to the certification body before assuming the scope covers the work.
Mason Ali is BM Certification’s ISCC representative for Australia and New Zealand. Get-ISO handles enquiries and coordinates the certification pathway. The ISCC directory lists BM Certification SIA as a cooperating body for ISCC EU and ISCC CORSIA. Where appointed, BM Certification makes certification decisions and issues certificates.
What does the ISCC EU document say about mechanical treatment?
ISCC EU 203 v4.2, sections 3.4.7 and 3.4.9, describes mechanical filtration and sedimentation at collecting points or storage facilities. The scope treatment depends on the material retaining the same waste code through that operation and the energy expenditure being negligible. A processing unit changes the material’s physical or chemical properties. The body reviewing your application needs enough evidence to assess the operation against those provisions. Check the actual equipment and settings, including any heating, drying or chemical addition, and retain the basis for the material classification.
Prepare a useful scope enquiry
- Map the sourcing route. State whether receipts come directly from restaurants or other points of origin, certified suppliers or both. Identify who owns the material at each stage and where it is stored. This helps assess collection, trading and storage activities alongside any treatment.
- Describe each treatment. List screens, filters, settling tanks, heaters and any other equipment. State what is removed or changed, operating conditions, chemicals added if any, and where the output goes. Explain whether heating supports pumping or is intended to remove water.
- Show the quantities. Retain incoming and outgoing weights, opening and closing stock, and removed solids, water or other losses for a consistent period. Explain measurement differences before using the figures to support a conversion or yield.
- Support the energy description. Supply relevant electricity readings, fuel records, equipment information and operating hours. Identify shared meters and missing data. Ask the body how to substantiate the applicable energy condition for the proposed scope.
- Agree the resulting scope and evidence. Document the certification body’s assessment and what it needs for the audit. For an existing certificate, discuss a proposed equipment or activity change before applying the existing scope to it.
Worked example — a screen is followed by an LPG heater
A collection site screens incoming UCO, lets it settle and heats it before dispatch. Its application says only “collection and filtration”. The scope reviewer cannot establish the treatment from that description. The site provides a flow sketch, explains the purpose and operating conditions of the heater, and supplies available LPG and quantity records. It identifies water and solids removed and flags any shared energy records. The body can then assess the activities and determine what further evidence or scope is needed. This example is illustrative and establishes no certification outcome.
Match the scope to the intended fuel and market
For UCO destined for FAME biodiesel, HVO renewable diesel or HEFA sustainable aviation fuel, ask what claim the customer needs in the destination market. This article addresses ISCC EU. Where the HEFA chain supports an ICAO CORSIA claim, assess the separate ISCC CORSIA criteria. Keep scheme-specific scope and GHG evidence requirements clear when the same site serves both chains.
Official documents and certification enquiries
Use ISCC EU 203 v4.2, sections 3.4.7 and 3.4.9 for the mechanical treatment and processing provisions. Check the ISCC document library for current material lists and system updates before finalising the application. Read the related CORSIA HEFA emissions evidence guide when preparing an actual-value data request.
Contact Get-ISO through the ISCC certification coordination service for initial certification, recertification or a change of certification body. Include your process description so the enquiry reaches the appropriate scope review.
General guidance. Use the applicable standard, scheme documents and agreed engagement criteria. Examples are illustrative and do not establish a certification outcome.